• 400 series stainless steel - penn stainless products

    400 Series Stainless Steel - Penn Stainless Products

    400 Series Stainless. The 400 series group of stainless steels has an 11 percent chromium and 1-percent manganese increase, above the 300 series group. The 400 series is susceptible to rust and corrosion under some conditions. Heat-treating will harden the 400 series.

  • stainless steel that is magnetic? [with graphics] - finishing

    Stainless steel that is magnetic? [with graphics] - Finishing

    2005. A. Stainless steel 300 series are slightly magnetic since they can contain from 0 to 8% ferrite formed after solidification depending of the chemistry of the steel batch. The second cause of magnetic response is martensitic transformation upon cold working or machining (alloy 301 work hardens and responds the most that way).

  • 400 series stainless steel magnetic properties

    400 Series Stainless Steel Magnetic Properties

    Magnetic properties of ferritic, martensitic and duplex stainless steels. Magnetic properties of ferritic, martensitic and duplex stainless steels on the relative magnetic permeability of the steel (more often described simply as The ferritic and martensitic stainless grades ('400' series) are generally free from

  • stainless steel (300 and 400 series) | helander

    Stainless Steel (300 and 400 Series) | Helander

    Stainless Steel 400 Series: These stainless steels generally contain chromium and manganese and are magnetic. While they still exhibit the corrosion resistance that is typical of stainless steel in general, they are less corrosion-resistant than the 300 series, and therefore typically cost less.

  • is the 400 series stainless steel magnetic? | answersdrive

    Is the 400 series stainless steel magnetic? | AnswersDrive

    A basic stainless steel has a 'ferritic' structure and is magnetic, formed from the addition of chromium - it can be hardened through the addition of carbon, making it 'martensitic'.However, the most common stainless steels are 'austenitic' - these have a higher chromium content and nickel is also added.

  • 400 series stainless steel magnetic - alibaba.com

    400 series stainless steel magnetic - alibaba.com

    Alibaba.com offers 137 400 series stainless steel magnetic products. About 54% of these are stainless steel sheets, 4% are stainless steel strips, and 1% are magnetic materials. A wide variety of 400 series stainless steel magnetic options are available to you, such as astm, aisi, and jis.

  • is 400 series stainless steel magnetic wholesale ... - alibaba

    Is 400 Series Stainless Steel Magnetic Wholesale ... - Alibaba

    Alibaba.com offers 213 is 400 series stainless steel magnetic products. About 32% of these are stainless steel sheets, 2% are stainless steel pipes, and 2% are stainless steel bars. A wide variety of is 400 series stainless steel magnetic options are available to you, such as jis, astm, and aisi.

  • 400 series stainless steel - cleveland metal exchange

    400 Series Stainless Steel - Cleveland Metal Exchange

    410 Stainless Steel Type 410 Stainless Steel is a martensitic stainless steel that provides good corrosion resistance plus high strength and hardness. It is magnetic in both the annealed and hardened conditions. A wide range of properties can be developed with different heat treatments. Data Bulletin

  • is stainless steel magnetic? (with pictures) - wisegeek.com

    Is Stainless Steel Magnetic? (with pictures) - wisegeek.com

    While the degree of magnetic attraction may vary, it is not unusual for items made with the 400 series stainless steel to provide enough attraction to interact with magnets, and in some cases to allow small metal items to adhere to the stainless steel surface. However, magnetic stainless steel in consumer products does not tend to carry a ...

  • stainless steel faqs | mid america stainless

    Stainless Steel FAQs | Mid America Stainless

    The AISI (American Iron and Steel Institute) was the originator of the 300 and 400 series numbering system (i.e., Type 304 stainless steel). They also published a Stainless Steel products manual that listed these designations and the chemical analysis as well as most mechanical and physical properties of each individual grade.

  • 400 series of stainless steel - permanentsteel.com

    400 Series of Stainless Steel - permanentsteel.com

    400 series stainless steel is a kind of iron, carbon chromium alloy. This stainless steel has a martensitic structure and an iron element, so it has normal magnetic properties. 400 series stainless steel has a strong resistance to high temperature oxidation, and compared with carbon steel, its physical properties and mechanical properties have been further improved.

  • 400 series stainless steel - atlantic stainless

    400 Series Stainless Steel - Atlantic Stainless

    The 400 series group of stainless steels typically have an 11% chromium and 1% manganese increase, above the 300 series group. This stainless steel series tends to be susceptible to rust and corrosion under some conditions although heat-treating will harden them.

  • article: magnetic properties of ferritic, martensitic and ...

    Article: Magnetic properties of ferritic, martensitic and ...

    Magnetic properties of ferritic, martensitic and duplex stainless steels Introduction. Ferritic, martensitic, duplex (and most precipitation hardening) stainless steels are usually classified as 'magnetic' since they exhibit a strong response (or pull) to a hand-held magnet.

  • differences between grades of stainless steel | career trend

    Differences Between Grades of Stainless Steel | Career Trend

    It can be made magnetic. The 304 grade is the most commonly used stainless steel, and the 316 grade is the second most common. Both have the same general characteristics of the 300 series. Tableware, cooking utensils, food processing equipment, food preparation and mild chemical applications use this stainless steel. 400-Series Stainless Steel ...

  • 400 series stainless steel - learn more about scrap metals

    400 Series Stainless Steel - Learn More About Scrap Metals

    What Is Magnetic Stainless? Most of the time, you can use a magnet to check if you have stainless steel or regular steel. With the 400 series stainless steel however you cannot. The carbon content in the 400 series makes this stainless steel magnetic and the 400 Series Stainless Steel Scrap Prices will be less. It also contains no nickel ...

  • 300 series stainless steel alloys - 302, 304, 316

    300 Series Stainless Steel Alloys - 302, 304, 316

    302 Stainless Steel is also formed into all types of washers, springs, screens and cables. 304 Stainless Steel: This non-magnetic alloy is the most versatile and the most widely used of all stainless steels. 304 Stainless Steel has lower carbon to minimize carbide precipitation and is used in high-temperature applications. It's commonly used to ...

  • 400 series ferritic - alloys | cumberland diversified metals

    400 Series Ferritic - Alloys | Cumberland Diversified Metals

    400 Series Ferritic - Alloys. The 400 series that CDM typically deals in is 409, 410S, 430, and 439. These are straight chromium alloys, that have low carbon and are magnetic but it not heat treatable. The 400 stainless steel series generally have good ductility and can be welded or fabricated without difficulty. Some of these grades can be ...

  • which stainless steels are magnetic? - quora

    Which stainless steels are magnetic? - Quora

    Stainless steel is a word that comprehends a huge range of steels with quite different properties, microstructures and compositions. Stainless steels can be divided into: * Austenitic stainless steels (such as the well known AISI 316 or 18-10): st...

  • the 200 series of stainless steels - the balance

    The 200 Series of Stainless Steels - The Balance

    The 200 series steels suffer from lower formability and ductility than 300 series grades, but this can be improved with the addition of copper. Applications for 200 Series Stainless Steels. The range of applications for 200 series stainless steels is narrower than that of 300 series steels due to its lower corrosion resistance.

  • the magnet test for stainless steel is not accurate | ausko ...

    The Magnet Test for Stainless Steel is Not Accurate | Ausko ...

    All stainless steel is magnetic except austenitic stainless steel which is actually 300 series stainless such as 304 and 316. However, 300 series stainless is non-magnetic only after it is freshly formed. 304 is almost for sure to become magnetic after cold work such as pressing, blasting, cutting, etc.

  • what is the difference between 300 series and 400 series of ...

    What is the difference between 300 series and 400 series of ...

    The 300 series stainless steel has an austenitic crystal structure. It is not magnetic. The 400 series, stainless steel has a ferritic crystal structure. It is magnetic. If you're using steel parts in a place that may come in contact with food or ...

  • sae steel grades - wikipedia

    SAE steel grades - Wikipedia

    The SAE steel grades system is a standard alloy numbering systems for steel grades maintained by SAE International.. In the 1930s and 1940s the American Iron and Steel Institute (AISI) and SAE were both involved in efforts to standardize such a numbering system for steels. These efforts were similar and overlapped significantly.

  • carpenter - magnetic properties of stainless steels

    Carpenter - Magnetic Properties of Stainless Steels

    If the magnetic permeability of an austenitic stainless steel is of particular concern, it can be measured by relatively simple means as described in ASTM Standard Method A342. Ferritic Stainless Steels. Ferritic stainless steels are ferromagnetic and have been used as soft magnetic components such as solenoid cores and pole pieces.

  • the difference between 18-8, 304 & 316 stainless steel

    The difference between 18-8, 304 & 316 stainless steel

    This refers to the 300 series of stainless steel with a chromium and nickel content in percentages. That means that an 18-8 grade fastener has 18% chromium and 8% nickel content. 18-8 type stainless steel has better resistance to corrosion than the 400 series. It can be hardened by only cold working and isn't magnetic. 304 stainless steel

  • is stainless steel magnetic? does it depend on the amount of ...

    Is stainless steel magnetic? Does it depend on the amount of ...

    A basic stainless steel has a 'ferritic' structure and is magnetic. These are formed from the addition of chromium and can be hardened through the addition of carbon (making them 'martensitic') and are often used in cutlery. However, the most common stainless steels are 'austenitic' - these have a higher chromium content and nickel is also added.

  • 400 series martensitic - alloys | cumberland diversified metals

    400 Series Martensitic - Alloys | Cumberland Diversified Metals

    400 Series Martensitic - Alloys. The 400 series that CDM typically sells is 410. It is a straight chromium alloy, with carbon levels that can vary from 0.10 to 0.65%. This radically changes the behavior of the martensitic alloys relative to the ferritic 400 series alloy.

  • ssina: stainless steel: faqs

    SSINA: Stainless Steel: FAQs

    Answer: The AISI (American Iron and Steel Institute) was the originator of the 300 and 400 series numbering system (i.e., Type 304 stainless steel). They also published a Stainless Steel products manual that listed these designations and the chemical analysis as well as most mechanical and physical properties of each individual grade.

  • an overview of austenitic and ferritic stainless steels

    An overview of austenitic and ferritic stainless steels

    Ferritic Stainless Steels (400 Series) About 20 percent of all stainless steel grades have a ferritic microstructure, with SS430 being the most widely used. SS409 has lower chromium and, therefore, reduced resistance to corrosion. SS439 has greater resistance to corrosion and improved high-temperature stability.

  • how to make stainless steel magnetic | sciencing

    How to Make Stainless Steel Magnetic | Sciencing

    The composition of stainless steel varies, and any stainless steel with nickel in it is difficult to magnetize, although cold-rolling it, stretching it or stressing it in other ways does increase its magnetic potential. Series 200 and 400 stainless steel do not have nickel, are naturally magnetic and can be magnetized.

  • understanding magnetic properties of 304 and 316 stainless ...

    Understanding Magnetic properties of 304 and 316 stainless ...

    Posted April 4, 2017 by Nicole Belanger. Understanding Magnetic properties of 304 and 316 stainless steel. It's important to understand when selecting a grade of stainless steel (SS) for your application or prototype, if the material needs to have magnetic properties or not.